pibot_cnc_laser_series:v496_pro:check_done:start

2.10 Check Done!

Congratulations!

Basic Function Testing Completed Successfully

All I/O interfaces have been verified and are functioning normally.

Next Steps:

Configure YAML files according to your machine specifications
Double-check jumper positions match your device operation mode
Verify all connections before applying power
Proceed with system integration and calibration
If you have the matching accessory, continue to 3.1 Test RJ12 Port; otherwise continue to 4.0 Pre-Operation.

pibot_cnc_laser_series/v496_pro/check_done/start.txt · Last modified: 2026/08/06 20:25 by 127.0.0.1