Table of Contents
V5.88 Video Guides
- Complete V5.88 Testing Playlist — Turney's Builds (2.1–2.11) — eleven short clips matched one-for-one with the Wiki checklist. Each clip is embedded at the top of its corresponding test page, beginning with 2.1 Prepare Tools.
- Guided Board Tour — Turney's Builds (6:24) — close-up orientation covering the USB ports, inputs, outputs, RS485, MOSFET channels, stepper-driver connections and configuration jumpers. Also embedded in the Pinout Reference.
- Independent Hands-On Review — CNCWOODSHOP (5:28) — real-workbench overview and V4.96 Pro comparison. This video uses a pre-production review unit; current product specifications, purchase options and Wiki instructions take priority.
Important: FluidNC signal assignments can be changed in YAML. Use these videos for orientation and follow the current Pinout Reference, test YAML and machine-specific wiring instructions for final setup.
v588 files
1-cp2102-usb-driver
2-fluidnc-v4.0.3-win64-fimware
3-v588-test-files-upload(config.yaml and index.html.gz)
v588 Sch
Schematic (PDF, revision 2026-08-26) — recommended: vector PDF, zoom in for component values and reference designators.
Preview of the earlier 2026-06-19 raster export (kept for reference; the PDF above is clearer and newer):
Official grblHAL Resources
Status checked: 2026-08-04. The official V5.88 target is available but currently marked Experimental.