Connet the Mainboard to the PC via USB.

Install the corresponding USB driver on the computer, and locate the corresponding port number in the Device Manager.

Windows 10 or later versions can automatically recognize USB drivers. If they fail to be recognized, you can install them manually.

• Official Driver Website: https://www.silabs.com/software-and-tools/usb-to-uart-bridge-vcp-drivers?tab=downloads

• Local Download: a-usb-driver-cp210x_vcp_windows.zip

Log in to the website https://installer.fluidnc.com/fluidnc, select the connection, and then choose the corresponding port number.

After connecting, select the installation option, choose the required version, and then click the install button.

Select the WiFi version.

choose a fresh installation.

Here you need to select WebUI 2.0.

waiting for 100% complete

Open File Browser, upload the corresponding yaml file, and activate it for use.

https://wiki.pibot.com/doku.php?id=pibot_cnc_laser_series:v496_pro:docs:xyzabc-drv8825-config

• This YAML file is used for V4.9PB V4.96Pro factory testing, including features such as 6-axis control, 6 limits, Probe, OLED, Relays, PWM, 0-10V output, and 485 communication.

https://wiki.pibot.com/doku.php?id=pibot_cnc_laser_series:v496_pro:docs:xyyza-tb6600-config

• This YAML file is used for V4.7B factory testing, configurations for X, Y1, Y2, Z, A axes. The last driver slot is configured for relay and coolant functions, and includes support for OLED display, PWM, 0–10V analog output, and 485 communication. (Also compatiable to the V4.7 V4.9PB V4.96PRO mainboard,)

Restart then complete.

A small tip: If you use the factory-provided yaml file without inserting the OLED, an error message will appear, but it will not affect usage. You can delete the OLED option in the yaml file to avoid the prompt.