Table of Contents

List 1: Ckeck Default Jumpers and Power on

⚠️
SAFETY FIRST: Please disconnect all external peripherals before starting the inspection process.
1

Initial Jumpers

💡 Only 3 jumpers by default from the factory ship
  • VDD selected 3.3V
  • SW-VCC selected 5V
  • GPIO26 Fuction selected as Relay output
2

Module Insert

  • Insert Antenna
  • Insert OLED (optional)
  • Insert TF Card (optional)
3

Power On

  • Connect 12V or 24V power to Vmot-main
  • ⚠️ Do not reverse polarity
  • Default: 24V recommended
  • Switch on power
✅

Expected Results

  • 5V power indicator LED should illuminate
  • OLED screen should display information/data (if installed)

Image shows

Coming soon!

Video demonstrations

https://wiki.pibot.com/doku.php?id=pibot_cnc_laser_series:v496_pro:docs:xyzabc-drv8825-config